DOMOGROUT 1-10 BRILL

Water-repellent, polymer-modified cement mortar for wall and floor tiles, Domogrout Brilliant 1-10 is a mixture of cement, fine-grained fillers, pigments, special polymers and additives. It is suitable for 1-10 mm wide grouts and for indoor and outdoor applications, such as kitchens, bathrooms, balconies, terraces, supermarkets, shops, etc.

Way of use

The substrate covered with tiles must be clean without dust and debris. Joints must be cleaned and wetted with a damp sponge before applying the grout.

Mixing

To 1.3 1.4 kg of water add 5 kg of DOMOGROUT BRILLIANT 1-10 and mix until a homogeneous mixture without lumps is obtained. A low speed mixer is recommended for mixing. Let the mixture mature for 5 minutes and mix again. Pot life at 23°C is 23 hours. Application temperature: +5°C to +35°C.

Application

The mixture is spread with a rubber spatula, diagonally across the joints, to fill completely without gaps. Excess material should be wiped off when the grout begins to tarnish on the tile. The surface is cleaned and the grout is smoothed with a wet sponge. At the end, when the grout has started to dry, the surface of the tiles is cleaned with a soft and dry cloth.