VOREL 07950 SANDING BLOCK
Plastic holder for attaching sandpaper.
The bottom surface covered with micro-rubber improves the adhesion of paper fastened with metal clips.
Properly selected hardness of the backing enhances the sanding effect.
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Product Details
94.800035
New
Specific References
- ean13
- 5906083079504
16 other products in the same category:
Reference: 93.400001
Brand: Sika
SikaGard 570W Pele Elastica + Fibras
Sikagard®-570 W Pele Elástica + Fibras is a water-based dispersion coating of styrene-acrylic polymers with fibers. After its ripening, it turns into a plasto-elastic membrane, without seams, with crack-bridging properties, even at low temperatures.
Reference: 94.270443
Brand: Yato
PLASTIC SCRAPER SET 6 PCS - YT-52740
Product descriptionSet of six fine, plastic, flexible putty scrapers. Dimensions - working width x height 50 mm x L180 mm, 80 mm x L 180mm, 100 mm x 180 mm, 150 mm x 180 mm, 200 mm x 205 mm, 40 mm x 180 mm. Putty intended for finishing, varnishing and decorating works.Purpose / applicationPutty intended for finishing, varnishing and decorating works
Reference: 06.000399
Brand: Tactix
Edger Trowel - 282061
Used to create a curved lip around the concrete surface Non-slip bi-material handle
Reference: 06.000427
Brand: Tactix
Gauging Trowel - 283033
Use to mix or gauge small quantities of mortar or quick setting plaster Non-slip bi-material handle size: 175mm
Reference: 06.000396
Brand: Tactix
Finishing Trowel Square Notched - 281211
Ideal for laying floor or wall tile Square teeth 6x6mm (1/4 x 1/4in.) Non-slip bi-material handle
Reference: 94.270126
Brand: Vorel
PU PLASTERING TROWEL
The rectangular polystyrene float is intended for furniture, abrasive, leveling plaster and other building mortars.Made of hard polystyrene, which ensures a long life.
Reference: 94.270488
Brand: Yato
MULTI FUNCTION PAINT SCRAPER - YT-52871
Scraper with edge profile, designed for cleaning hard surfaces and profiled surfaces, e.g. handrails. It has a wide blade at the front and special holes for pulling nails stuck in the cleaned material. Made of 1.5 mm thick sheet metal. Purpose / application For cleaning hard surfaces or surface profiles, e.g. handrails.
Plastic holder for attaching sandpaper.
The bottom surface covered with micro-rubber improves the adhesion of paper fastened with metal clips.
Properly selected hardness of the backing enhances the sanding effect.