Bucket Trowel - 283073
- Use to clean buckets
- Non-slip bi-material handle
- size: 178mm
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Product Details
06.000400
New
Specific References
- ean13
- 6942629251026
16 other products in the same category:
Reference: 06.000521
Brand: Tactix
Plasterers Hawk - 281330
Used for holding plaster or mortar during application Non-slip bi-material handle
Reference: 06.000397
Brand: Tactix
Rubber Float - 281402
Use to smoothly apply grout to floor and wall tile Non-slip bi-material handle
Reference: 94.270032
Brand: Yato
BENCH PIPE VICE
Made of high quality malleable cast iron Ensuring a firm grip on the pipe Preventing them from turning during operation The jaws, on the other hand, are made of very hard S55C
Reference: 13.100076
Brand: Other
THERMAL INSULATION / CEMENT INSULATION NET - NET
FIBERGLASS MESH 90GR/SQM
Reference: 94.800035
Brand: Vorel
VOREL 07950 SANDING BLOCK
Plastic holder for attaching sandpaper.The bottom surface covered with micro-rubber improves the adhesion of paper fastened with metal clips.Properly selected hardness of the backing enhances the sanding effect.
Reference: 94.270076
Brand: Yato
FLOAT WITH A GRAY SPONGE YT-51906
WALL TRAY WITH SPONGE INTENDED FOR HARDENING LIQUID DECORATIVE PLASTERS AND FOR WASHING TILES DURING INSTALLATION.
Reference: 94.270339
Brand: Yato
PLASTER BOARD SPATULA - YT-52760
Polished stainless steel spatula. In the case there is a container with 4 bits (ph2 - 2 pcs and socket 2 pcs.) handle covered with two-component materialequipped with metal socket for 1/4" bits.
Reference: 94.270050
Brand: Yato
PROFILE GAUGE
Facilitates accurate cutting of material in hard-to-reach partsIt has magnets that hold it on metal surfacesTile applications, general applications
Reference: 94.270075
Brand: Yato
TROWEL WITH SPONGE SMPX - YT-51902
SMPX Spatula Spatula- Spatula is designed for washing tiles during grouting. SPMX sponge spatula base is characterized by increased density. It also has a very porous structure, thanks to which we achieve greater absorbency and better water drainage during roll printing. Size: 270x130mm
Reference: 93.200001
Brand: Sika
Sikaflex® Construction⁺ 600ml
Sealant for concrete facades and masonry.
- Use to clean buckets
- Non-slip bi-material handle
- size: 178mm