
Reference: 06.000449
Brand: Tactix
Brass Stripper Brush - 315011
175mm (7 in.) Non-slip bi-material handle
The 10mm outer section increases the life of the disc. The reduced thickness allows faster and more accurate cutting, without breaking the edges and with less load on the power tool.
With high quality selected cobalt hardness and selected industrial grade diamonds, even when working by hand or even at a 45° angle, it can cut with the same safety and precision.
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Reference: 06.000449
Brand: Tactix
175mm (7 in.) Non-slip bi-material handle
Reference: 06.000108
Brand: Tactix
SK5 blade, 8 teeth/9 points per inch, hardened triple ground teeth for fast cutting Metric and SAE scale Non-slip bi-material handle
Reference: 06.000450
Brand: Tactix
175mm (7 in.) Non-slip bi-material handle
Reference: 94.270052
Brand: Yato
WITH RATCHET ACTION; MAX. CUTTING DIAMETER: 42MM; NORMAL PIPE VP30; WATER COURSE PIPE VW30; EL. APPLIANCE PIPE VP36; 8CR 13 STEEL BLADE; HRC 54
Reference: 54.000235
Brand: Yato
Weight 0.7 kg Total weight with packaging 0.7 kg Diameter 230 mm Hole diameter 22,2 mm Accessory mount type M14 Segment height 10 mm Cutting thickness 2,7 mm Max. speed 6500 min-1 For dry or wet cutting Dry cutting, Wet cutting For cutting Ceramic tiles, Clay hollow brick, Clinker bricks, Concrete, Floor tiles, Granite, Red brick, Stone, Stone tiles,...
Reference: 94.270043
Brand: Yato
FOLDING KNIFE WITH SHARP BLACK BLADE TI 190mm
Reference: 54.000234
Brand: Yato
Yato YT-6003, Diamond Blade for Concrete, Baustellenmaterial, Natural Stone, 115 x 2,2 x 22,2 MM - Trocken-Beton, Bricks, Porcelain Stoneware, Mampostería, Stone- By High Qualität-Cup-Diamant-115 mmx22.2 Thick- Heavy Duty Diamond Edge Height 8 mm, Strength: 2,1 MM- Blade Important for all Tiler, Builder
Reference: 94.270176
Brand: Yato
Yato YT-75121 knife ideal for cutting dense materials or in tight spaces where there is a risk of the blade getting wedged.
The 10mm outer section increases the life of the disc. The reduced thickness allows faster and more accurate cutting, without breaking the edges and with less load on the power tool.
With high quality selected cobalt hardness and selected industrial grade diamonds, even when working by hand or even at a 45° angle, it can cut with the same safety and precision.