PIPE WRENCH GERMAN TYPE
YATO wrenches letters for plumbing and assembly work.
The maximum jaw opening is 60mm at a depth of 30mm.
The precise helical adjustment of the jaw opening allows them to be freely adjusted according to the size of the unscrewed
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Product Details
94.270056
New
Specific References
- ean13
- 596083013485
16 other products in the same category:
Reference: 94.270345
Brand: Yato
YT-64300 CORNER CLAMP SET
A set of four strong, spring-loaded angle clamps, designed for clamping connected elements at an angle of 90 degrees. The bodies of the clamps are made of plastic, symbol PA6, equipped with strong steel compression springs. Working range from 5 to 22 mm. External dimensions 80 x 85 x 50 mm.Purpose / application
Reference: 54.000305
Brand: Yato
YT-37490 FURNITURE TRANSPORT ROLLER SET 300kg
Raise the Edge, the Corner of the Furniture with the Lever, Slide the Roller Plate & Lower the Load & Do the Same with the Other Rolls.The Steel Lever is Used to Lift the Load Before Inserting the Roll Stands.Metal Stands with Rollers, Lined with Rubber, Designed for Transporting & Setting Furniture Or Other Loads.
Reference: 94.270159
Brand: Yato
PNEUMATIC GREASE GUN - YT-07055
Pneumatic lubricator with a capacity of 400 cm3.- Each time you pull the trigger, a small amount of grease is dispensed.- Inlet pressure 0.2-0.8 MPa.- Outlet pressure 30-40 MPa.- Capacity 28 liters / minute- 2 rigid and 2 flexible tips.- Connection diameter 1/4 ". Application Industry, automotive, agriculture
Reference: 94.800047
Brand: Vorel
VOREL 06989 DRILL FINISHES SET OF 3 PCS
A set of wire brushes, made of brass corrugated steel wireMaximum speed: 4500 rpmWheel size: 20/50/50 mmThe set is suitable for polishing or removing dirt of various sizes
Reference: 06.000132
Brand: Tactix
Cup Suction - 284301
Max capacity 20kg (44lb) Safety working load 10kg (22lb)
YATO wrenches letters for plumbing and assembly work.
The maximum jaw opening is 60mm at a depth of 30mm.
The precise helical adjustment of the jaw opening allows them to be freely adjusted according to the size of the unscrewed