TERMINAL PRESS YT-5130
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Description
Plasterboard sheet metal stake press (plasterboard riveter), for fixing profiles used on plasterboards without screws or nails.
Product Details
94.270509
16 other products in the same category:
Reference: 94.270272
Brand: Yato
STRAIGHTEDGE
Flexible ruler, accuracy class II. Made of stainless steel. There is a permanent millimeter scale on both ends. Width 19mm, overall length 176mm, thickness 0.9mm in reverse thread value conversion table. For precise measurements and marking on locksmith, mechanical, decorative, etc.
Reference: 94.270033
Brand: Yato
MAGNETIC WELDING HOLDER
Made of steel sheet and powerful ferritti magnets. It allows precise material joint at the following angles: 30°, 45°, 60°, 75°, 90° and 135°. Magnet capacity approximately 11.5 kg
Reference: 06.000053
Brand: Tactix
Staple Gun Heavy Duty - 218011
TUV/GS certified Use with 4-14mm staples Supplied with 600pc staples
Reference: 06.000173
Brand: Tactix
Bender Tubes 4pcs - 339060
Easily make bends of soft materials 6.35mm, 9.52mm, 12.7mm, 15.87mm capacity
Reference: 06.000050
Brand: Tactix
Rivet Gun - 217001
Heavy duty 2.4mm (3/32 in.), 3.2mm (1/8 in.), 4.0mm (5/32 in.)}, 4.8mm (3/16 in.)
Reference: 54.000305
Brand: Yato
YT-37490 FURNITURE TRANSPORT ROLLER SET 300kg
Raise the Edge, the Corner of the Furniture with the Lever, Slide the Roller Plate & Lower the Load & Do the Same with the Other Rolls.The Steel Lever is Used to Lift the Load Before Inserting the Roll Stands.Metal Stands with Rollers, Lined with Rubber, Designed for Transporting & Setting Furniture Or Other Loads.
Reference: 94.270025
Brand: Yato
Heat shrink sold sl.
Transparent shrink tube with a tin ring in the middle and two rings of thermal glue on the sides, which additionally seals the connection for conductors with cross-section: 0.25-0.34 mm2, 26-24 AWG tube length: 26 mm,inner diameter tubes: 1.7 mm,melting point of tin: 105 ° C,sheath shrink temperature: 80 ° C A quick and easy way to make a permanent and...
Reference: 94.271008
Brand: Vorel
VOREL 73413 GAS TORCH PIEZO
Gas burner with PIEZO ignition.It is supplied with butane gas from an external cylinder - in accordance with EN417.The connection of the TWIST torch cylinder.A 1.3 kW burner allows the temperature to reach 1300 ° C.Gas consumption 96 g / h.The burner has adjustable flame power.
Reference: 94.270137
Brand: Vorel
VOREL 05950 PLASTIC PUTTY 4pcs
Japanese plastic putties, used for precise spreading of glue, mortar, putty, resins, etc. Made of resistant and flexible plastic.
Reference: 94.270257
Brand: Yato
GAS TORCH 360 WITH PIEZO - YT-36710
Operating temperature up to [°C]:1000 Power [kW]:1 Operating time up to [h]:73 gr Ignition unit:PIEZO Container Type:Blister pack additional information:Gas, butane Certificate:EN417 Angle [°]:360 Yato:Blowtorch
