- Out-of-Stock
FIRE ACRYLIC 280ml- NET
Elastomeric Sealing Material, based on special acrylic resins and inorganic fillers, resistant to fire. Characteristics: In case of fire, it has the property of swelling and the inorganic crust that is created slows down the spread of fire. Contains no solvents. After its installation, in contact with atmospheric air, it turns into a cohesive plasto-elastic mass, which adheres to the edges of the joints. It can be applied even on wet surfaces without the use of a primer. It is suitable for indoor and outdoor use. Meets the requirements of BS 476 part 20: 1987.
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Description
AREAS OF APPLICATION Recommended for sealing joints between frames and masonry in building installations with fire safety specifications and generally where there is a requirement to delay the spread of fire. It is not suitable for sealing joints permanently immersed in water (eg tanks).
Product Details
94.00027
16 other products in the same category:
Reference: 54.000558
Brand: Yato
CONFIRMAT SCREW DRILL BIT - YT-33022
Product Type: Arbor for Hole sawDiameter (mm): 5 -7 mmMaterial: Carbon Steel
Reference: 94.000001
Brand: Elastotet
ACRYLIC 280ml - NET
One-component acrylic sealant based on acrylic resins, for interior and exterior use. It has good adhesion to most substrates. It can be applied even on wet surfaces without the use of a primer. It is painted after hardening with the usual building paints.
Reference: 94.800022
Brand: Vorel
UV 14 DAYS MASKING TAPE
Blue paper masking tape. Self-adhesive and UV-resistant. It is used to protect edges and other surfaces exposed to dirt during plastering and painting works inside and outside buildings.
Reference: 29.180002
Brand: Ambro-Sol
SPRAY ZINCO 98% H.Q Ambro - Sol 500ml
Cold galvanizing spray with high molecular weight and permanent metal coating. Protects all metal surfaces from oxidation. Creates a layer that can be painted over or used as a final protective layer. Ideal for finishing and for the repair and treatment of galvanized parts.
Reference: 52.990821
Brand: Yato
POLYSTYRENE GUN 220W - YT-82190
Material: Plastic and metal Dimensions: 45 x 43 x 44 cm (L x W x H) Current voltage/frequency: 230 V / 50 Hz Rated power: 220W
Elastomeric Sealing Material, based on special acrylic resins and inorganic fillers, resistant to fire. Characteristics: In case of fire, it has the property of swelling and the inorganic crust that is created slows down the spread of fire. Contains no solvents. After its installation, in contact with atmospheric air, it turns into a cohesive plasto-elastic mass, which adheres to the edges of the joints. It can be applied even on wet surfaces without the use of a primer. It is suitable for indoor and outdoor use. Meets the requirements of BS 476 part 20: 1987.