AQUA STAIN GEL Er-Lac - NET

21.400018

Protective impregnation varnish.

Size
Color
  Security policy

(edit with the Customer Reassurance module)

  Delivery policy

(edit with the Customer Reassurance module)

  Return policy

(edit with the Customer Reassurance module)

Description
  • Application method: Brush
  • Dilution: 10% v/v with water
  • Deep drying: 2 -3 h
  • Packages: 0.75L, 2.5L
  • Yield: 8-10 m²/l
  • Number of Layers: 2

AQUA STAIN GEL is an odorless water-soluble acrylic-based impregnation varnish in gel form for wooden interior and exterior surfaces. Due to its special composition, it does not drip or run, so it can be easily applied to vertical surfaces and wooden ceilings. Protects from UV radiation, waterproofs and deeply impregnates. Ideal for doors, windows, wooden wall coverings, wooden structures, wooden beams, etc. Available in colorless final varnish 2020 and in 15 attractive natural shades of the AQUA STAIN color palette which show the waters of the wood.

Product Details
21.400018

Specific References

ean13
5204366231305
16 other products in the same category:

Reference: 29.150002

Brand: Ambro-Sol

SPRAY INFLATE & REPAIR TYRES Ambro-sol 300ml

Pump spray for repairing any type of tire, with or without an inner tube. It is effective and permanent, creating a complete and uniform sealing film inside the tire. This product has been fully tested to certify effectiveness. After the repair you need to check the tire pressure.

Reference: 29.152003

Brand: Ambro-Sol

ANTI - SLIP FOR SURFACES Ambro - Sol 400ml

Suitable for use on slippery surfaces such as steps, ramps, showers and all types of floors. It creates a silicone layer which increases the anti-slip effect when in contact with water, reducing the risk of slipping. For professional use. Use: The surface must be clean of dust or greasy substances. For a better result, clean the surface where the product...

Reference: 54.000235

Brand: Yato

DIAMOND BLADE DRY CUTTING - YT-6005

Weight 0.7 kg Total weight with packaging 0.7 kg Diameter 230 mm Hole diameter 22,2 mm Accessory mount type M14 Segment height 10 mm Cutting thickness 2,7 mm Max. speed 6500 min-1 For dry or wet cutting Dry cutting, Wet cutting For cutting Ceramic tiles, Clay hollow brick, Clinker bricks, Concrete, Floor tiles, Granite, Red brick, Stone, Stone tiles,...

Follow us on Facebook