- Out-of-Stock
PALAOS COTTON WORK UNIFORM (Delta Plus) - NET
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Description
PALAOS work uniform from Delta Plus made of 100% cotton. It has reflective strips on the shoulders, arms and legs for increased visibility and safety. The Palaos work overalls have an elasticated waist, a covered zip and 5 pockets for plenty of storage.
Color: Orange
Product Details
47.878002
Specific References
- ean13
- 3295249217051
16 other products in the same category:
Reference: 94.270123
Brand: Yato
YT-74227 SHOCK ABSORBER
The YT-74227 safety shock absorber with tape and two shotguns is part of a fall restraint system that connects the seat belts to the anchorage point. The safety shock absorber is made of properly sewn polyester tape. When stopping a fall, specially designed seams gradually tear, slowing down the speed of falling
Reference: 94.270349
Brand: Yato
YT-0837 PANEL REMOVAL SET 6PCS
Non scratch panel removal toolEssential tool in every garage and service station6 pcs, different shapes help safely remove/fit car's interior trims, panels, mouldingsManufactured from non marking material
Reference: 94.000009
Brand: Elastotet
S - MIRROR 280ml
With excellent adhesive abilities on all substrates, such as wood, novopan, concrete, plaster, walls painted with plastic colors or ripolin. It is odorless and does not irritate the skin and eyes at all.
Reference: 93.400001
Brand: Sika
SikaGard 570W Pele Elastica + Fibras
Sikagard®-570 W Pele Elástica + Fibras is a water-based dispersion coating of styrene-acrylic polymers with fibers. After its ripening, it turns into a plasto-elastic membrane, without seams, with crack-bridging properties, even at low temperatures.
Reference: 94.800074
Brand: Vorel
METAL LIMITED FOR DRILLING COLAR 8 PCS - VOREL 24070
Sizes: 3/4/5/6/8/10/12/16 mm + 1 Allen key. Purpose: The depth stops are used for accurately determining the depth of the hole being drilled