PVC7335 GLOVES (Delta Plus)
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Description
PVC on interlock cotton lining. Length: 35 cm. Thickness 0,90 mm and 1,20mm. Support: interlock cotton. Coating: 100% cured and vulcanised PVC.
Product Details
47.400016
Specific References
- ean13
- 3295249020200
16 other products in the same category:
Reference: 94.800052
Brand: Vorel
VOREL 08316 FLEX BASE 125MM/SCREW
Dual function soft velcro sandpaper base for both screw wheel and spindle drill. It is used for cleaning, grinding, smoothing, polishing, surface treatment of materials such as: steel, wood, plastics and building materials.Diameter: 125mmIt has an M14 threaded female socket and a corresponding threaded shaft Operating revolutions: 12200 / min
Reference: 29.150026
Brand: Ambro-Sol
SPRAY CARBULATER CLEANER Ambro - Sol 400ml
Special for cleaning the inside and outside of the carburetor. It can also be used to degrease various mechanical parts of the car. It deeply cleans oils and impurities accumulated from pollution.
Reference: 06.000509
Brand: Tactix
Organizer 25cm - 320017N
25.5W x 21D x 4H cm 18 compartments Removable dividers
Reference: 26.600050
Brand: VMD
LIQUID LUBRICANT - VMD25L 1L
Water-based lubricant that solves any friction issues that arise during the insertion and removal of cables.It maintains its lubricating action even after years of use, protecting the cable from aging.Compatible with all types of cables.The lubrication tube with a pointed cap allows for easy application of the gel on all common types of cables.
Reference: 94.270217
Brand: Yato
FUEL AND OIL FUNNEL - YT-0692
Type of tool: funnel Material: polypropylene Tools application for operating fluids Dimensions: 150mm
Reference: 39.000202
CHEMICAL EPOXY RESIN WITH 2 NOZZLES 300ml
Chemical fixing epoxy resin, two components in cartridge (300 ml) for general application on concrete or stone. High load capacity. Less shrinkage during curing which allows higher loads and is suitable for application at low temperatures.
