New product developed for specific professional applications for harder metal cutting and metalworking. Oil with mineral paraffin base enriched with special EP anti-stick additives. Ideal for use in difficult threading operations with particularly hard, alloy steel. Suitable for use in the hydraulic sector.
It helps in the good friction of the arid and prevents it from breaking.
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Reference: 29.151001
Brand: Ambro-Sol
HT10 with 360° spray valve: multi-purpose lubricant with 10 powerful functions – unblocks any stuck mechanism, protects, lubricates, degreases, resistant to high temperatures, anti-corrosive, anti-rust, waterproof, with excellent dissolving power (dissolves rust). With high-quality ingredients, with excellent deep-penetrating lubricating power, it is...
Reference: 29.150006
Brand: Ambro-Sol
Anti-slip spray suitable for gears and belts. It guarantees constant synchronization between moving parts. Suitable for trapezoidal and flat belts and enhances the effectiveness of the belt as it enters the pores thus preventing cuts and tears. Suitable for gears and belts.
Reference: 29.150027
Brand: Ambro-Sol
Product with synthetic active substances that can detect gas or compressed air leaks in pipe, valves, connections, canisters and pressure tanks. It is non-flammable, so it can be used to test gas stoves.
Reference: 29.150025
Brand: Ambro-Sol
Product based on silicone oil with excellent lubricating properties, anti-stick properties and water-repellent properties. The lubricant significantly reduces the friction created during the movement of the equipment present in the lines of bottling, packaging, cutters, knives and saws. It protects the electrical contacts from moisture and prevents the...
Reference: 29.170004
Brand: Ambro-Sol
Black paste that seals old and new generation engines. Special controlled distribution trigger. Resistance to temperatures from – 60 °C to 200 °C, peaks at 260 °C. Suitable for valve covers, sheet metal, water pumps and gears. Suitable for contact with antifreeze and oils.
Reference: 29.150028
Brand: Ambro-Sol
It creates a film that prevents the formation of chips observed when welding any surface. The film also prevents oxidation and corrosion by chemicals. Does not contain silicone.
Reference: 29.120005
Brand: Ambro-Sol
RADIATORS, WHITE APPLIANCES - RAD: - Special color for decoration and protection of all internal and external surfaces such as radiators, heating elements, etc. Resistant up to 120°C. Ideal for domestic radiators, heaters and electric radiators. PAST2: acrylic enamel for the decoration and protection of all surfaces of all appliances, such as washing...
Reference: 29.151021
Brand: Ambro-Sol
Mixture of solvents, designed to remove excess silicone. The product acts faster in the presence of fresh silicone than in the presence of hardened silicone.
Reference: 29.150002
Brand: Ambro-Sol
Pump spray for repairing any type of tire, with or without an inner tube. It is effective and permanent, creating a complete and uniform sealing film inside the tire. This product has been fully tested to certify effectiveness. After the repair you need to check the tire pressure.
Reference: 29.172002
Brand: Ambro-Sol
Fast setting general purpose cyanoacrylate eraser suitable for welding various materials. The color is transparent so it doesn't show when applied. It has very high liquidity.
Reference: 29.150026
Brand: Ambro-Sol
Special for cleaning the inside and outside of the carburetor. It can also be used to degrease various mechanical parts of the car. It deeply cleans oils and impurities accumulated from pollution.
Reference: 29.152003
Brand: Ambro-Sol
Suitable for use on slippery surfaces such as steps, ramps, showers and all types of floors. It creates a silicone layer which increases the anti-slip effect when in contact with water, reducing the risk of slipping. For professional use. Use: The surface must be clean of dust or greasy substances. For a better result, clean the surface where the product...
Reference: 29.150017
Brand: Ambro-Sol
This spray works effectively in places that are difficult to clean, such as corners or narrow crevices. Removes dust and dirt with one spray. It is also ideal for cleaning lenses, glasses, computer monitors and cameras.
Reference: 29.150029
Brand: Ambro-Sol
It can be used as a paint remover in oil paints to restore wood (dissolve 300/500g in a liter of water and apply the product with a brush). Suitable for cleaning floors, stoves, grills, ovens and hoods (dissolve 200/500g in ¾ liter of water and let it soak for 6-8 hours). For blocked drains from salts, food, fatty foods, etc. (pour 150/200 grams directly...
Reference: 29.110001
Brand: Ambro-Sol
PRIMER - The clear base applied prior to painting to ensure excellent application of spray paints on difficult plastic, alloy and metal surfaces that otherwise could not be painted. Protects against rust. Can be spray painted after drying. Suitable for metal car parts, covers scratches and imperfections. Dries to the touch in 15 minutes. For professional...
Reference: 29.152002
Brand: Ambro-Sol
Detergent that can be used on various surfaces. Removes dirt such as oil, grease, etc. Non-flammable product, fully water-soluble. For use on cars, engines, tires, oil stains as well as shutters, tools, machine maintenance, garden, BBQ and home.
New product developed for specific professional applications for harder metal cutting and metalworking. Oil with mineral paraffin base enriched with special EP anti-stick additives. Ideal for use in difficult threading operations with particularly hard, alloy steel. Suitable for use in the hydraulic sector.
It helps in the good friction of the arid and prevents it from breaking.
