VOREL 07950 SANDING BLOCK
Plastic holder for attaching sandpaper.
The bottom surface covered with micro-rubber improves the adhesion of paper fastened with metal clips.
Properly selected hardness of the backing enhances the sanding effect.
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Product Details
94.800035
New
Specific References
- ean13
- 5906083079504
16 other products in the same category:
Reference: 94.270488
Brand: Yato
MULTI FUNCTION PAINT SCRAPER - YT-52871
Scraper with edge profile, designed for cleaning hard surfaces and profiled surfaces, e.g. handrails. It has a wide blade at the front and special holes for pulling nails stuck in the cleaned material. Made of 1.5 mm thick sheet metal. Purpose / application For cleaning hard surfaces or surface profiles, e.g. handrails.
Reference: 94.270032
Brand: Yato
BENCH PIPE VICE
Made of high quality malleable cast iron Ensuring a firm grip on the pipe Preventing them from turning during operation The jaws, on the other hand, are made of very hard S55C
Reference: 94.270076
Brand: Yato
FLOAT WITH A GRAY SPONGE YT-51906
WALL TRAY WITH SPONGE INTENDED FOR HARDENING LIQUID DECORATIVE PLASTERS AND FOR WASHING TILES DURING INSTALLATION.
Reference: 94.270339
Brand: Yato
PLASTER BOARD SPATULA - YT-52760
Polished stainless steel spatula. In the case there is a container with 4 bits (ph2 - 2 pcs and socket 2 pcs.) handle covered with two-component materialequipped with metal socket for 1/4" bits.
Reference: 13.100076
Brand: Other
THERMAL INSULATION / CEMENT INSULATION NET - NET
FIBERGLASS MESH 90GR/SQM
Reference: 06.000128
Brand: Tactix
Tile Spacers
Flexible PE material Precision manufactured for accuracy
Reference: 94.270443
Brand: Yato
PLASTIC SCRAPER SET 6 PCS - YT-52740
Product descriptionSet of six fine, plastic, flexible putty scrapers. Dimensions - working width x height 50 mm x L180 mm, 80 mm x L 180mm, 100 mm x 180 mm, 150 mm x 180 mm, 200 mm x 205 mm, 40 mm x 180 mm. Putty intended for finishing, varnishing and decorating works.Purpose / applicationPutty intended for finishing, varnishing and decorating works
Plastic holder for attaching sandpaper.
The bottom surface covered with micro-rubber improves the adhesion of paper fastened with metal clips.
Properly selected hardness of the backing enhances the sanding effect.