(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Black Soft Waffle Pad
• Black Open-cell foam ideal for Finishing.
• This soft pad consists of a foam with a characteristic waveform. During work, air flows between the tabs, causing cooling of the varnish and foam.
• It is distinguished by a low density of cells with reduced rigidity. The structure of the foam absorbs evenly the liquid polish or wax and does not cause the pad to heat up. The features of the foam make it very soft and resilient.
• Combining 924 Perfect Finish Polish with the black waffle pad you will disappear holograms on clear coats.
• Black Waffle Pad is perfect for applying the 927 Ceramic Wax for full paint protection, color depth and gloss, without the risk of scratching the varnish.
Orange Medium Pad
• Orange Closed-cell foam ideal for Light Cutting and Finishing.
• This medium hardness pad consists of a foam structure that holds the compound on the surface of the pad. However, the orange foam is characterized by lower cell stiffness. This slight softer hardness has a twofold effect on its properties.
• Combining 923 Heavy Cut Polishing compound with the orange pad will cut light scratches while applying 924 Perfect Finish Polish with the orange pad you will reappear the color depth and the high gloss of the clear coat.
Blue Hard Pad
• Blue Open-cell foam ideal for Hard and Fast Cutting and Finishing.
• This hard pad consists of a foam characterized by relatively large cell sizes, which in practice means high aggressiveness. It is used to remove deep scratches and preparation of the surface for the next stages of polishing.
• Combining the 923 Heavy Cut Polishing compound onto the blue hard pad , treat heavily damaged paints to remove deep scratches , tarnishing or oxidation in order to get high level of buffing in addition to a very nice gloss and finish.
Recommendations on use:
• Apply the compound evenly on the pad not directly on the surface.
• Polish always by applying the polisher with pad in horizontal position and not vertically or at an angle on the surface.
• Start polishing with low speed. Do not exceed 2000 rpm.
• Do not polish surfaces under direct sunlight.
• Do not exceed temperatures of 45°C on clear coat’s polished surface.
951 White Hard Pad Plus
• White Open-cell foam ideal for Fast Cutting and Polishing.
• This very hard pad consists of a foam that changes its properties when exposed to heat. Its hardness depends on temperature to a great extent. Initially the foam is very hard to the touch, but as soon as it is warmed up, it softens up to a certain level. The foam becomes so soft that it is recommended to use it for cutting and polishing.
• Combining the 923 Heavy Cut Polishing compound onto the white very hard pad you get a high level of buffing in addition to a very nice gloss and finish.
Reference: 94.800067
Brand: Vorel
Material: plastic, stainless steel Universal pistol model made of plastic and metal. For the application of foam from typical screw-in containers. The gun is intended for applying polyurethane foam during works
Reference: 94.270056
Brand: Yato
YATO wrenches letters for plumbing and assembly work.The maximum jaw opening is 60mm at a depth of 30mm.The precise helical adjustment of the jaw opening allows them to be freely adjusted according to the size of the unscrewed
Reference: 94.800047
Brand: Vorel
A set of wire brushes, made of brass corrugated steel wireMaximum speed: 4500 rpmWheel size: 20/50/50 mmThe set is suitable for polishing or removing dirt of various sizes
Reference: 94.270450
Brand: Yato
On the side of the dispenser there is a practical scale for easy fluid dispensing Made of durable PE resistant to operating fluids, it has a practical flexible funnel and a screw cap Capacity 3L
Reference: 94.270020
Brand: Yato
Mechanism for quick and automatic stripping of both flat and round cables in the range from 0.2 mm2 to 6.0 mm2 The ends of the working jaws are made of steel hardened to the level of hrc 52-57
Reference: 94.270345
Brand: Yato
A set of four strong, spring-loaded angle clamps, designed for clamping connected elements at an angle of 90 degrees. The bodies of the clamps are made of plastic, symbol PA6, equipped with strong steel compression springs. Working range from 5 to 22 mm. External dimensions 80 x 85 x 50 mm.Purpose / application
Reference: 06.000584
Brand: Tactix
Loading capacity 250kg (550lb) Max 500kg (1100lb) S hook Heavy duty die cast zinc alloy rubber covered cambuckie
Reference: 94.271008
Brand: Vorel
Gas burner with PIEZO ignition.It is supplied with butane gas from an external cylinder - in accordance with EN417.The connection of the TWIST torch cylinder.A 1.3 kW burner allows the temperature to reach 1300 ° C.Gas consumption 96 g / h.The burner has adjustable flame power.