(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
YATO inductive voltage tester YT-28313. Designed for voltage detection in electrical cables. Operating on the principle of induction, it indicates without contact whether the wires are active. • Induction test of 2 zones: 12-1000 V and 48-1000 V • signaling of the detected voltage in the cables via LED diode and sound signal • elimination of the direct contact of the tip with the insulated cable increases the safety of use and speeds up work • the sensitivity setting allows detection of live cables and walls • continuity test • auto-off function • flashlight function • housing resistant to impacts and drops from a height of 2 m • 2 AAA 3 V batteries included
Reference: 94.270022
Brand: Yato
Electric voltage and circuit breaker detector screwdriver. It also allows basic testing of transistors, diodes, resistors or capacitors.
Reference: 54.000495
Brand: Yato
Free speed: 6800rpm Air inlet: 1/4 in Maximum tightening force: 1200 N.m Socket Type: 1/2 Air Consumption: 500L/Min Bolting ability: Weight: 3kg
Reference: 06.000270
Brand: Tactix
High quality aluminium body Batteries not included
Reference: 54.000602
Brand: Yato
Product description Universal, colorless hot melt adhesive with a diameter of 11 mm and a length of 300 mm.
Reference: 94.270283
Brand: Yato
Weight: 10.5kg Professional/amateur: amateur Engine type: electrical Rated power input: 650w Max. Pressure: 207bar Painting speed: 1,1l/min Capacity: unlimited Spraying method: airless Sprayer technology Spraying equipment dedicated for: diy'ers Can be used with such materials: universal use for bigger projects Voltage/frequency: 210-240v/50-60hz/a
Reference: 94.270236
Brand: Yato
AC VOLTAGE TEST-CONTACT: 70-250V; AC VOLTAGE TEST NON-CONTACT: 70-600VAC; DC VOLTAGE TEST UP TO 250VDC; POLARITY TEST: 3 V-36VDC; CONTINUITY CHECK: 0-50M OHM; VOLTAGE MEASUREMENT: 50-500HZ; SLOTTED TIP140MM
Reference: 06.000193
Brand: Tactix
AC Voltage: 200V / 600V +-(1.2%+10) DC Voltage: 200mV / 2V / 200V +- (0.5%+2), 600V+- (0.8%+2) DC Current: 20uA / 200μΑ/ 2mA/20mA +- 1.0%+2), 200mA+-(1.5%+2), 10A+-(3%+2) Resistance: 200Ω+-(0,8%+3), 2kΩ/20kΩ/200kΩ+-(0,8%+2), 2ΜΩ+-(1,0%+2) Diode test Data hold