(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Reference: 06.000193
Brand: Tactix
AC Voltage: 200V / 600V +-(1.2%+10) DC Voltage: 200mV / 2V / 200V +- (0.5%+2), 600V+- (0.8%+2) DC Current: 20uA / 200μΑ/ 2mA/20mA +- 1.0%+2), 200mA+-(1.5%+2), 10A+-(3%+2) Resistance: 200Ω+-(0,8%+3), 2kΩ/20kΩ/200kΩ+-(0,8%+2), 2ΜΩ+-(1,0%+2) Diode test Data hold
Reference: 94.270024
Brand: Yato
The digital meter is particularly useful in diagnosing and detecting defective components of electrical installations.The device allows the measurement of current and AC voltage TRUE RMS. This means that the true effective value of the alternating waveform is measured.
Reference: 94.270236
Brand: Yato
AC VOLTAGE TEST-CONTACT: 70-250V; AC VOLTAGE TEST NON-CONTACT: 70-600VAC; DC VOLTAGE TEST UP TO 250VDC; POLARITY TEST: 3 V-36VDC; CONTINUITY CHECK: 0-50M OHM; VOLTAGE MEASUREMENT: 50-500HZ; SLOTTED TIP140MM
Reference: 94.270281
Brand: Yato
Lamp type: LEDLight distribution: extensive illuminationType: SMD LEDLight stream [lm]: 380Battery: Li-ion batteryTension [V]: 3,7Battery capacity [mah]: 2200Charging time [hour]: 6Light duration [hour]: 3Protection class (IP code): IP 44Protection class: IIILuminaire angle [degree]: 120Characteristics: with battery
Reference: 54.000495
Brand: Yato
Free speed: 6800rpm Air inlet: 1/4 in Maximum tightening force: 1200 N.m Socket Type: 1/2 Air Consumption: 500L/Min Bolting ability: Weight: 3kg
Reference: 94.270282
Brand: Yato
Yato's Yt-82185 Bandsaw has 100w power and is 10% for cutting rails at a cutting angle setting it has. It has a base with a clamp that locks the cut material for maximum work safety, an LED light that illuminates the cutting point, a speed regulator as well as a 3m elastic cable. Package includes a spare 14 TPI cutting ribbon, 1140 x 12.7 x 0.6mm
Reference: 94.270362
Brand: Yato
Yato electric pulse sander with 1300Watt motor and 2 meter cable length. It has a rectangular sanding base and is ideal for sanding large surfaces. It has the ability to adjust the rotation speed for optimal work depending on the substrate and its suction system helps to collect dust residues during the operation of the tool. The handle is included in the...