(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Reference: 94.270282
Brand: Yato
Yato's Yt-82185 Bandsaw has 100w power and is 10% for cutting rails at a cutting angle setting it has. It has a base with a clamp that locks the cut material for maximum work safety, an LED light that illuminates the cutting point, a speed regulator as well as a 3m elastic cable. Package includes a spare 14 TPI cutting ribbon, 1140 x 12.7 x 0.6mm
Reference: 94.270236
Brand: Yato
AC VOLTAGE TEST-CONTACT: 70-250V; AC VOLTAGE TEST NON-CONTACT: 70-600VAC; DC VOLTAGE TEST UP TO 250VDC; POLARITY TEST: 3 V-36VDC; CONTINUITY CHECK: 0-50M OHM; VOLTAGE MEASUREMENT: 50-500HZ; SLOTTED TIP140MM
Reference: 94.270277
Brand: Yato
Powerful compressor with a precision manometer with a 12V supply voltage. Designed for the use of bicycles and children used in awnings in cars, motorcycles and bicycles, and also - with the help of replaceable end caps - mattresses, pontoons, saws. Power: 180W Metal cylinder: 30mm maximum. Pressure: 150 PSI air flow: 40 l / m LED lamp with permanent or...
Reference: 94.270437
Brand: Yato
The Hummer H2 is a very powerful Portable and Handy Jump Starter with the output capacity of 600A / 12V. H2 is capable of jump starting the weak/dead battery of large vehicles upto 6.0Litre petrol or 4.0 Litre diesel vehicles, Auto Transmission Vehicles, even motorcycles, ATV, jet skis and speed boats. It can be used as a jump starter for up to 15 times...
Reference: 06.000193
Brand: Tactix
AC Voltage: 200V / 600V +-(1.2%+10) DC Voltage: 200mV / 2V / 200V +- (0.5%+2), 600V+- (0.8%+2) DC Current: 20uA / 200μΑ/ 2mA/20mA +- 1.0%+2), 200mA+-(1.5%+2), 10A+-(3%+2) Resistance: 200Ω+-(0,8%+3), 2kΩ/20kΩ/200kΩ+-(0,8%+2), 2ΜΩ+-(1,0%+2) Diode test Data hold
Reference: 94.270024
Brand: Yato
The digital meter is particularly useful in diagnosing and detecting defective components of electrical installations.The device allows the measurement of current and AC voltage TRUE RMS. This means that the true effective value of the alternating waveform is measured.