Reference: 06.000549
Brand: Tactix
Economic Joint Knife-Flexible
Carbon steel blade Non-slip bi-material handle
Plasterers Hawk - 281330
- Used for holding plaster or mortar during application
- Non-slip bi-material handle
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Product Details
06.000521
New
Specific References
- ean13
- 6942629250890
16 other products in the same category:
Reference: 06.000400
Brand: Tactix
Bucket Trowel - 283073
Use to clean buckets Non-slip bi-material handle size: 178mm
Reference: 06.000397
Brand: Tactix
Rubber Float - 281402
Use to smoothly apply grout to floor and wall tile Non-slip bi-material handle
Reference: 93.200001
Brand: Sika
Sikaflex® Construction⁺ 600ml
Sealant for concrete facades and masonry.
Reference: 94.270076
Brand: Yato
FLOAT WITH A GRAY SPONGE YT-51906
WALL TRAY WITH SPONGE INTENDED FOR HARDENING LIQUID DECORATIVE PLASTERS AND FOR WASHING TILES DURING INSTALLATION.
Reference: 94.270488
Brand: Yato
MULTI FUNCTION PAINT SCRAPER - YT-52871
Scraper with edge profile, designed for cleaning hard surfaces and profiled surfaces, e.g. handrails. It has a wide blade at the front and special holes for pulling nails stuck in the cleaned material. Made of 1.5 mm thick sheet metal. Purpose / application For cleaning hard surfaces or surface profiles, e.g. handrails.
Reference: 94.270075
Brand: Yato
TROWEL WITH SPONGE SMPX - YT-51902
SMPX Spatula Spatula- Spatula is designed for washing tiles during grouting. SPMX sponge spatula base is characterized by increased density. It also has a very porous structure, thanks to which we achieve greater absorbency and better water drainage during roll printing. Size: 270x130mm
Reference: 94.270339
Brand: Yato
PLASTER BOARD SPATULA - YT-52760
Polished stainless steel spatula. In the case there is a container with 4 bits (ph2 - 2 pcs and socket 2 pcs.) handle covered with two-component materialequipped with metal socket for 1/4" bits.
- Used for holding plaster or mortar during application
- Non-slip bi-material handle